100V/50A-Battery Charge & Discharge Tester Lab Testing Equipment

Product Description of Lab Testing Equipment

The battery charge/discharge tester is a high efficiency test instrument newly developed by our company for quickly solving the battery pack check discharge experiment, battery pack residual capacity test, single unit inspection, and battery daily maintenance. The instrument adopts advanced charging and discharging control technology at home and abroad, and is specially designed for battery charging, discharging, cyclic charging and discharging tests according to the charging and discharging characteristics of lead-acid and lithium batteries. The tester can monitor the battery voltage, discharge current, discharge duration, discharge capacity and other parameters during the discharge process in real time; the instrument adopts an intelligent embedded operating system and supports wireless data transmission to realize the networking of battery testing, which makes battery pack maintenance and management easier and more scientific, thus extending the service life of the battery pack. It can be widely used in various industries such as communication, electric power, tower, battery manufacturers, new energy vehicle enterprises, railroad, subway, petrochemical, etc. With the advantages of easy operation and safe charging and discharging, it is the ideal test tool for DC system operation and maintenance testing.

Product Feature of Lab Testing Equipment

• Product discharge using polymeric positive temperature coefficient resistor (Polymeric Positive Temperature Coefficient) referred to as PTC, the device can play a protective role in the circuit when the current surge is too large, too high temperature, with overcurrent (such as short circuit) self-protection function, overcurrent resistance value increases sharply, to limit the current to avoid damage to the components in the circuit. When the fault is removed, the temperature of the PTC device automatically drops and returns to a low resistance state, with a high safety factor, avoiding the red hot phenomenon and a stronger environmental adaptability, making the whole discharge test process more safe and stable.
• The main control board adopts the imported STMicroelectronics high-performance ARM CPU: stable performance, high frequency, powerful, dual CPU redundancy design in the discharge process, the main CPU is responsible for the operation and processing of instructions, the secondary CPU is responsible for alarm monitoring and process control, when there is an emergency situation, the main and secondary CPUs will The main CPU is responsible for instruction calculation and processing, while the secondary CPU is responsible for alarm monitoring and process control. In case of emergency, the main and secondary CPUs will lock the output at the same time

Fig.1 Control Board Processor Physical Drawing

• 7-inch true color touch screen: 7-inch high-definition LCD with a resolution of 1024x800 can be used to visually display histograms, tables, graphs, data reports, help documents, etc. The touch panel is a military grade multilayer composite film resistive touch panel with strong anti-interference ability, especially suitable for electromagnetic interference and transient pulse interference generated by power stations, battery rooms and high-frequency chargers. The menu operation and page switching can be performed directly through the touch screen, and the whole operation is simple and clear.​
• It has the function of charging and discharging parameter preset template: six commonly used test parameter templates are built-in, and the template data can be saved after power failure. After setting, as long as its parameters are not changed, it is always effective, saving the trouble of setting many parameters every time you start up. Meet the parameter settings of different types of batteries. The test can be started directly after power on. There is no need to set parameters frequently. The test is really started with one key, making the test simple and efficient.
• The unit monitoring module adopts LORO wireless+RS485 wired transmission: compatible with 2V/4V/6V/12V four unit voltage level monitoring. And the built-in power supply, without external power supply. Each wireless module can monitor 12 batteries at the same time, which is simpler than the traditional connection mode where each module only monitors 4/6 individual voltages. There are two communication modes, wireless and wired, which can be switched according to the current situation (Note: single monitoring module is optional)
• Professional PC terminal data analysis and management software is equipped: it can carry out deep mining of test data generated by the equipment, including single voltage curve, whole group of voltage curves, whole group of current curves, single bar graph, real-time data table, password protection of upper computer software, experimental conclusion and other functions, and can automatically generate Excel/Word document format reports according to requirements and print and archive them.
• Powerful and convenient data storage and backup function: 8GB data storage space is built in, which can store more than 1000 groups of charging and discharging data, and supports functions such as viewing, analyzing and deleting historical data. A 16GB USB flash disk is equipped with the machine, which can transfer the test process data to the USB flash disk after inserting it into the USB port of the device, and then take the USB flash disk to the PC for data analysis and data backup management through the upper computer software.
• View of historical data curve: through the historical data curve function of the data management interface, you can view and query the built-in data files in the form of charts and oscillograms, as well as zoom in, zoom out, move left and right of the oscillograms from multiple angles

• A variety of test discharge termination conditions can be set, including discharge capacity, discharge duration, single low voltage, low voltage of the whole group. After any test condition is met, the discharge will be automatically stopped, as well as over-voltage, over-current, over-temperature, abnormal data storage, reverse connection of voltage test terminals and other test fault alarm displays.
• A variety of test charging termination conditions can be set, including discharge capacity, charging duration, single low voltage upper limit, and whole group voltage upper limit. Charging will be automatically stopped when any of the test conditions is met.
• It has the activation and repair function: the package can activate the active substance of the negative electrode vulcanization through the activation function, cycle the charge and discharge, reduce the decline of the capacity, and improve the battery life.
• Self calibration function: the instrument is equipped with voltage and current calibration correction function, which can calibrate the measurement results on site. The measurement error can be repeatedly calibrated and corrected to ensure the measurement accuracy. This function is especially suitable for use when there is a requirement for consistency between instrument readings and field instruments.
• The single monitoring interface of the instrument supports viewing the single voltage data in multiple ways: the single battery voltage is collected in real time and displayed in two ways, namely, histogram/table, for the convenience of evaluation and analysis, and for the convenience of intuitively displaying the battery voltage status.

Echnical parameters of Lab Testing Equipment

100V50A-Battery Charge & Discharge Tester.pdf

SKYLINE (DONGGUAN SKYLINE INDUSTRIAL CO.,LTD) provides full line of Toys Testing Equipment, Fire Testing Equipment ,Flammability Testing Equipment,Tensile Test Machine, Furniture Testing Machines ,Textile Testing Equipment and other lab test equipment .We also offers value added support services like lab layout, calibration testing procedures / standards, recording techniques and operations of equipment, etc. We have agents to support you in over 10 countries around the world. With a network of representatives providing sales and technical support world-wide.

SKYLINE has achieved good repute in the fields of Fire Testing Equipment, Footwear Testing Equipment, Toy Testing Equipment, Furniture Testing and other lab test equipment.

SKYLINE focus on the lab testing equipment for decads and  we manufacturers the testing instrument as per the international standards like EN71, ASTM, IS 8124 and SRS.

Our major customers are BV, ITS, TUV, SGS, Hasbro and SASO, For these customer 100% testing instruments are supplied by SKYLINE and we are the continuous supplier for these lab. Since SKYLINE is a manufacturer design/develop with advanced technology and having well experienced Technicians which will provide high quality service after sale.

Our main products

Lab Testing Equipment

Flammability Testing Equipment

Fire Testing Equipment

Wire and Cable Fire Tester

Building Material Fire Tester

Toys Testing Equipment

Environmental Test Chamber

Textile Testing Equipment

Furniture Test Machine

Mattress Testing Machine

Temperature And Humidity Test

Our Service

Testing Equipment Design and manufacture

Test Lab Planning and Establish

Toys Test Equipment Upgrade

Toys Test Equipment operation Training

Toys Finish Goods and Mattress  Inspection

Acting for Customer Testing and Certifying

Acting for Foreign Trading Company Quality Inspection

Please have a look at our website and don’ t hesitate to contact us if any items catch your interest. We will do our best to meet your requirement.
Thank you for visiting. We look forward to your inquiry to carry forward win-win cooperation with you soon.