Machine Introduction
This machine is mainly designed for batch detection of insertion
force and withdrawal force on the charging gun assembly line. The
horizontal design of this machine simulates the user's use mode:
the charging seat is fixed, and the charging gun runs the test at a
certain speed to detect the insertion and withdrawal force of the
charging gun. The use of WINDOWS, Windows Chinese screen setting,
simple and convenient operation, and all data can be stored (test
conditions, displacement curve, life curve, inspection report ----,
etc.), the machine can set the insertion force and withdrawal force
upper and lower limits of the range of force, measured force beyond
the range can alarm output. It is a comprehensive price is
relatively strong for charging gun assembly line test instrument.
The machine is often used for: charging gun insertion and
withdrawal test of new energy vehicles, pure electric vehicles,
hybrid vehicles.
Test procedure
This machine is suitable for mass production insertion and
withdrawal force detection. When the charging gun is inserted into
the jack of the testing machine, the machine starts the test: the
cylinder moves, moves towards the charging gun to push the buckle,
so that the buckle is in a relaxed state, so that the buckle will
not be damaged during the test withdrawal force. The action of the
testing machine screw makes the charging gun move in the charging
seat, and the force travel curve formed is recorded, and the value
of the insertion force and the withdrawal force are automatically
captured. After the test is completed, the data is automatically
saved, and then the cylinder moves, returns, takes out the charging
gun, and a product test is completed.
Technical Parameter
Test load type 2kgf, 5kgf, 20kgf, 50kgf (choose one)
Minimum resolution 0.01
Minimum display load 0.1gf, 1gf, 10gf
Load accuracy 0.2%FS
Minimum fine-tuning distance 0.01mm
Effective force measurement range 0.4%-100%
The test force error is within ±1% of the indicated value
Test speed range 0-300mm/min
Speed accuracy ±1%
Resolution of the maximum test force ±1/100000 (constant resolution
throughout)
Unit of force value Kg, N, lb, g, KN
Displacement unit mm, cm, in
Overload protection Automatic protection over 10% of maximum load
Safety device electronic limit protection
Dimensions 1200×600×1600mm
Machine weight 200kg
